|
||||
News and Information about the Test of Electronics in Research & Design, Production, Maintenance, and Installation. | ||||
Main MenuNewsletterNews AreaInfo AreaWeblinksProduct Focus |
Readers Top 5 News of last 30 days
News - General T&MUSB and LAN Diode Sensors for fast and accurate Power Measurements18 March 2015 - Rohde & Schwarz has enhanced its sensor portfolio with the new R&S NRPxxS and R&S NRPxxSN USB three-path diode power sensors. The new models offer even more flexibility. In addition to the well-established USB sensors, new sensors that support LAN are now available. LAN is the ideal choice for remotely controlled applications over large distances. The completely redesigned sensors offer unprecedented measurement speed and measurement accuracy, even at low levels. The R&S NRPxxSN model offers both a USB and a LAN interface. Both power sensor models are available for three different frequency ranges, from 10 MHz to 8 GHz, to 18 GHz and to 33 GHz. Outstanding measurement speed The R&S NRPxxS/SN sensors enable 10 000 triggered measurements per second with a minimum trigger resolution of 100 µs. A special mode even permits in excess of 50 000 equidistant measurements per second. And the improved three-path diode design made it possible to decrease the lower measurement limit to ?70 dBm. The result is a very wide dynamic range of 93 dB and instruments that can measure up to four times faster than previous solutions, especially at low levels. LAN operation via web browser The new LAN interface on the R&S NRPxxSN model now allows remote power measurements over large distances. For example, it is possible to control monitoring applications for satellite systems or particle accelerators via a central PC by placing sensors at various positions in the system. The power sensor is conveniently controlled from a GUI accessed via web browser. No additional software is needed. Numerous test modes for a wide variety of applications Thanks to their outstanding performance, R&S NRPxxS/SN power sensors help mobile communications users perform power measurements on signals such as GSM, 3GPP, LTE and LTE-Advanced. The 33 GHz model is also ideal for development and production of anticollision radar systems in the automotive sector. The continuous average, burst average, timeslot average, gate average and trace measurement test modes all remain available. The new R&S NRP8S, R&S NRP18S and R&S NRP33S USB three-path diode sensors and the R&S NRP8SN, R&S NRP18SN and R&S NRP33SN USB/LAN diode sensors are now available. Related Articles: |
Upcoming Events More events...
Tag CloudOscilloscope
JTAG
Boundary Scan
Goepel
PXI
Rohde & Schwarz
Tektronix
Keysight
AOI
Anritsu
National Instruments
Inspection
Teledyne LeCroy
Aeroflex
LTE
Yokogawa
AXI
Spectrum Analyzer
Keithley
In-Circuit-Test
Signal Analyzer
Automotive
EMC-Test
Signal Generator
Advantest
Multitest
B&K Precision
Corelis
Power Supply
SPI
Flying Prober
Teseq
Cognex
Switching
Teradyne
Viscom
Pickering
Fluke
GAO Tek
PCIe
|
||
© All about Test 2018 |