All-about-Test

1. AXI ...: (T&M Glossary); Automatic X-Ray Inspection; Created on 30 November -0001
2. Differential High-Voltage Probes for Oscilloscopes: (General T&M); ... and power electronics. This probe delivers the industry's widest differential-voltage range of 7000 V (DC + peak AC) with a 7600-V maximum measurable differential voltage before amplifier saturation, an ...; Created on 18 April 2018
3. Stackable USB Digital Storage Oscilloscope: (General T&M); ... of the USB Digital Storage Oscilloscopes: Up to 1GS/s maximum sample rate 200 MHz bandwidth Up to 128 MS/ch of waveform memory PC based user interface (USB 2.0) Stackable up to 12 ...; Created on 09 April 2018
4. Affordable Mixed Signal Oscilloscopes with 1 GSa/s Sampling Rate: (General T&M); ... 70, 100, 200, and 300MHz models 2 GSa/s sample rate interleaved 140 Mpts maximum record length 16 digital channels with logic analyzer (MSO upgrade) Serial bus decoding supporting I2C, SPI, UART/RS232, ...; Created on 03 April 2018
5. General Purpose Digitizers with Sampling Rate up to 125 MS/s: (General T&M); ... cards. The new versions extend the performance range by increasing the maximum sampling rate from 80 MS/s up to 125 MS/s. The increased sampling rate, together with higher overall bandwidth, enables the ...; Created on 30 March 2018
6. High Speed Probe Card with Data Rates up to 6 Gbps: (Component Test); ... frequency testing probe card, probe card for Display driver IC and Logic device 50 Ω impedance matching probe needle; (IP) Special SUB board with coaxial wire & probe; Minimization of impedance miss-matching ...; Created on 26 March 2018
7. Oscilloscope Probes for Power Electronics Measurements: (General T&M); ... fast-switching common mode signals. There are four different models with maximum peak voltages from 750 V to 6000 V. The integrated offset compensation operates independently of probe attenuation and ...; Created on 19 March 2018
8. Test System for e-mobility high Voltage Components: (Cable/Backplane Test); ... for electric or hybrid vehicles. The newly developed high voltage generator HVG 4300 delivers voltages to 4,300 Vdc / 3,000 Vac and is current limited to a maximum of 3.8 mA. According to DIN EN 50191, ...; Created on 14 March 2018
9. Multi-device Synchronization for Lock-in Amplifiers and Arbitrary Wave Generators: (General T&M); ... are measured simultaneously. In synchrotron applications such as beam position monitoring, MDS facilitates multi-axis measurements. www.zhinst.com/ ...; Created on 14 March 2018
10. Compact low-cost eight-in-one Oscilloscope: (General T&M); ... all the way to 300 MHz bandwidth; these upgrades can be purchased as test needs increase over time. The two-channel oscilloscopes have maximum sample rates of 2 Gsample/s and a memory depth of 2 Msample. ...; Created on 12 March 2018
11. Software Platform that integrates Simulation, Design, Test Workflows: (General T&M); ... the right computing resources where and when needed Evaluate collected data to optimize workflow Ensure new hardware and software works with existing hardware to maximize ROI Predict bottlenecks ...; Created on 12 March 2018
12. All-in-One Solution for EMI/EMC Compliance Testing: (General T&M); ... ated to maximize test efficiency. To ensure accurate results and save time for users, the loss or gain of the various accessories has already been captured in the software and is accounted for during measurem ...; Created on 07 March 2018
13. JTAG DFT Assistant for Zuken PCB Design Suite: (Board test); ... says: “XJTAG is pleased to be a part of Zuken’s solution ecosystem. Companies need to determine early in the design phase how to maximize test coverage using the minimum number of test points, so it is ...; Created on 25 February 2018
14. Stimulus Test Cell for Differential Pressure Sensors: (Component Test); ... pressure controller and pressure application nozzle newly developed by Advantest. A maximum of 8 devices can be measured simultaneously, achieving unprecedented efficiency in the testing of these high-volume ...; Created on 20 February 2018
15. Automated IC Handler with Thermal Control: (Component Test); ... labor costs, this handler maximizes system utilization among working groups in different locations. The combination of automated device handling, wide-temperature ATC capabilities from -45° C to 125° ...; Created on 12 February 2018
16. New Detector for flexible automated X-ray Inspection: (Board test); ... and double-sided PCBs. It enables selective 2D, 2.5D and 3D X-ray inspection with high image quality at highest speed. The StingRay Detector is another option for the inline AXI systems of the X Line · ...; Created on 10 February 2018
17. Fanless Multi-Range DC Power Supply: (General T&M); ... fan. The PFR-100 series is available with a maximum output voltage of 50V or 250V. The PFR-100 series is a power supply with a five-fold rated power that allows users to self-define voltage and current ...; Created on 04 February 2018
18. AXI System for larger electronic Assemblies ...: (Board test); AXI System for larger electronic Assemblies 31 January 2018 – Viscom AG unveiled the X8068 SL X-ray inspection system designed for the requirements of electronics manufacturers that produce in-line larger ...; Created on 29 January 2018
19. Inline X-ray Inspection of BGAs, LGAs or THT-Components: (Board test); ... AXI systems incorporate 2D or 2.5D X-ray tomography. But these technologies provide limited capability causing high false calls and are insufficient to find core defects such as Head in Pillow and in many ...; Created on 28 January 2018
20. Economical 500 MHz Dual-Channel AWGs: (General T&M); ... l waveforms, Noise, IQ signals, and PRBS patterns with a maximum amplitude of 20V pp. EasyWave software, provided free, is a powerful arbitrary waveform editing application that supports many means of convenient ...; Created on 15 January 2018
21. Boundary Scan Integration in Flying Probe Tester: (Board test); ... flying probes to reach parts of the circuit with no JTAG access allows boundary scan testing to achieve maximum coverage. The integration allows test engineers to shorten test cycle times at the same time ...; Created on 10 January 2018
22. EMI Tent Enclosures for Benchtop Precompliance Tests: (General T&M); ... l mounted at the side provides one 240V/10A AC filter, two 240V/10A DC filters, and four coaxial feed through adapters with screw caps. The front opening provides access to the test space and is closed usi ...; Created on 08 January 2018
23. DOCSIS 3.0/3.1 Analyzer for Realtime Analysis: (Service/Maintenance); ... detailed signal analysis. To maximize and maintain a high data throughput when surfing and consuming multimedia content, the DOCSIS 3.1 data over cable system interface specification was developed as ...; Created on 18 December 2017
24. 5G Propagation Range Simulator: (Board test); ... e mile maximum at a few feet of resolution. The Eastern OptX 2400+ is not a signal emulator. The systems use low-loss fiber optic cable to create the propagation delay associated with radio transmissio ...; Created on 11 December 2017
25. Tester for Switched Mode Power Supplies: (Board test); ... is one of their star products and combines high quality with performance. The IT9121 power analyser can measure voltage, current, power, frequency, harmonics and other parameters. It has a maximum rated ...; Created on 10 December 2017
26. PC Software for EMC Pre-compliance Testing: (Board test); ... linear or logarithmic frequency axis automatic creation of test reports many import/export-functions EMCview software currently supports spectrum analyzers from Rigol and Siglent, but support ...; Created on 06 December 2017
27. Fast and easy Signal Processing for Digitizers: (General T&M); ... a maximum of 4k or 8k as this is the limitation of the FPGA. Supported Spectrum Products The SCAPP package is a driver extension for all Spectrum cards. It can be used with the ultra-fast digitizers ...; Created on 04 December 2017
28. Saki joins the ASYS PULSE Community for PCB Assembly Line Productivity: (Board test); ... ership of Saki, we have approached our goal to establish one solution for the whole production operation." "Joining the Pulse Community expands Saki's opportunity to maximize production-line productivi ...; Created on 04 December 2017
29. 2-Channel Benchtop Oscilloscopes with customizable Display: (General T&M); ... a maximum capacity of 1 Mpts/ channel (2 Mpts in interlaced mode). The display allows to view 32 measurements at the same time as the measurement dashboard. Analysis is facilitated by the 32 standard ...; Created on 27 November 2017
30. Programmable AC Power Sources up to 3000VA: (General T&M); ... APS-7200 (2000VA) and APS-7300 (3000VA). The APS-7000 series features low noise, low THD, and highly stabilized power output that are ideal for the product development and verification. The maximum rated ...; Created on 27 November 2017
31. Portable 15 and 25 GHz Sampling Oscilloscopes: (General T&M); ... traces, histogramming and statistical analysis. Equivalent sampling rate tops out at 15 TS/s—that’s a time resolution of just 64 fs—along with an unusually long maximum trace length for sampling oscilloscopes ...; Created on 21 November 2017
32. Efficient Testing of Semiconductor Devices: (Component Test); ... to utilize a common measurement environment from design evaluation through production, achieving efficiency-boosting standardization. The test unit is compact (W220mm x H206mm x D472mm) and has a maximum ...; Created on 20 November 2017
33. Test of Bluetooth Audio Devices: (Board test); ... analyzers—expanded selection of A2DP codecs, faster pairing time, new measurement features—helps our users maximize the performance of their next-generation wireless audio products.” The APx Bluetooth ...; Created on 06 November 2017
34. Multi-Channel Arbitrary-Waveform Generator: (General T&M); Multi-Channel Arbitrary-Waveform Generator 03 November 2017 - Zurich Instruments announces the HDAWG, an arbitrary waveform generator with the highest channel density and shortest trigger latency (; Created on 01 November 2017
35. Digital Power Meter for single-phase AC Measurements: (General T&M); ... measurement parameters to meet the requirement of accuracy and clarity for the test on manufacturing process. Standard mode extends the display to the maximum of 8 measurement parameters (2 major measurements ...; Created on 30 October 2017
36. Board Marker Probe for PCB Testing: (Board test); ... or bare tinned copper. The probe features a full length threaded housing which allows for maximum adjustability in the Z-direction. Spare tip replacement assemblies are available. Tony DeRosa, Senior ...; Created on 26 October 2017
37. Wireless Communication Measurements according to ETSI Standards: (Board test); ... The standard ETSI EN 300 328 V.2.1.1 (2016-11) describes the requirements on wireless communication devices operating in the 2.4 GHz ISM band. Maximum Output Power As per the standard, any wireless ...; Created on 09 October 2017
38. Wireless 30MHz Scope-in-a-Probe: (General T&M); ... screen. The IkaScope WS200 offers a 30MHz bandwidth with its 200MSa/s sampling rate and the maximum input is +/-40Vpp. It provides galvanically-isolated measurements even when a USB connection is charging ...; Created on 04 October 2017
39. 64 GBaud BERT Solution for 400G Receiver Testing: (Board test); ... to market faster. The M8040A enables R&D and test engineers to master the receiver test challenges for 400G data center interconnects.” The new M8040A is the latest member of the modular AXIe based M8000 ...; Created on 25 September 2017
40. Debugging and Offline Analysis of PAM4 Optical Devices: (Board test); ... time correlated or contiguous record of a signal. One company that understands the value of an optical PAM4 solution based on real-time oscilloscopes is Maxim Integrated, a manufacturer of high-speed, ...; Created on 20 September 2017
41. High-Density Modular LXI Ethernet Reed Relay Matrix Modules: (General T&M); ... new plug-in matrix module range—providing access to all signal connections on 200 pin connectors. The plug-in modules are constructed using Pickering Electronics’ Reed Relays which offer maximum performance ...; Created on 18 September 2017
42. Programmable High Voltage DC Power Supplies: (General T&M); ... and maintains the high power density characteristic and 1U height appearance of the PSU-LV series. The maximum output voltage of 60V is expanded to the maximum voltage of 600V and the maximum power ...; Created on 12 September 2017
43. RF Contactor compensates for HIB Tolerances: (Component Test); ... maximum repeatability and low repair and replacement cost. The wipe motion of the probe provides scrub through oxides on the IC pads and cleans itself when moving back to its original free height. This ...; Created on 12 September 2017
44. Waveform Analysis and Search Feature for Oscilloscopes: (General T&M); ... oscilloscopes provide automated measurements of common parameters such as frequency, period, rise and fall times, duty cycle, and maximum and minimum voltages, but the measurements are usually limited ...; Created on 06 September 2017
45. Field Strength Measurement for LTE-TDD: (General T&M); ... The code-selective measurement process used in the SRM-3006 makes it possible to automatically and precisely extrapolate for the values of electromagnetic fields (EMF) that occur at maximum traffic ...; Created on 06 September 2017
46. Solid-State-Drive Test Solution covers also BIST: (Component Test); ... footprint, software and thermal performance as the protocol test solution. This option targets production test insertions requiring only a low-speed serial interface for maximum synergy with protocol test ...; Created on 20 August 2017
47. Switching and Lightning Impulse Testing: (Board test); ... as for example for the use of these systems in research and development. Maximum Safety for Personnel and Equipment For measuring the signals AMOtronics offers both highly shielded as well as completely ...; Created on 20 August 2017
48. Boundary Scan DFT Assistant for Zuken PCB Design Suite: (Board test); ... pleased to be joining Zuken’s solution ecosystem. Companies need to determine early in the design phase how to maximize test coverage using the minimum number of test points, so it is essential to know ...; Created on 20 August 2017
49. VNAs to Support High Data Rate Requirements of 5G and Data Center Cloud Systems: (Component Test); ... the level of performance necessary for R&D engineers to accurately and reliably model high-frequency devices, to verify state-of-the-art designs, and to maximize throughput without sacrificing accuracy ...; Created on 16 August 2017
50. Remote Control Solution for PXI Systems with Thunderbolt 3: (General T&M); ... PXI systems using Thunderbolt 3. The PXIe-8301 offers PCI Express Gen 3 connectivity through two Thunderbolt 3 ports to maximize performance and delivers up to 2.3 GB/s of sustained data throughput. Engineers ...; Created on 10 August 2017
51. Broadband Amplifiers with tunable Transmission Characteristics: (Board test); ... to optimize the output signal from the amplifier: a continuously variable bias point between Class A and Class AB and the choice between maximum output power and high mismatch tolerance. The user can chang ...; Created on 02 August 2017

Main Menu

Newsletter

News Area

Info Area

Weblinks

Product Focus

Upcoming Events

Tag Cloud

Social Media